Home > Microlights >

  Dropz Rev

Alternative Views:



- Over 1.2 Million Effect variations!

- Choose out of 24 different solid colors for each of your strobe color choices! - 4 Bonus blocks with never before seen effects and functions!

- Ability to custom select each color in your 6, 4, 3, 2, and 1 color strobe!

- Ultra durable, small, lightweight, bright, and revolutionary! - Exlusive randomizer technology, transforming your light into patterns that are impossible to duplicate!

-This light does anything and everything!

This is the cream of the crop my friends! This light can do everything and anything from ribbons to strobes, to rainbows, to insane effects never before seen! Enjoy this wild create that is EXCLUSIVE to Liquidemotions.com. Welcome to the world of the Dropz Rev Microlight my friends! Cased in the same great Dropz 5 casing you have know to love, powered by 2 CR-1616 batteries for long lasting power and brightness! Check out the list below for all of the wild modes and functions for each mode! Enjoy!

Drops Rev Instructions: When you first power up the rev chip, the light automatically boots into color selection mode. All of the custom colors will default to white. If you have used your light previously, all of your color selections will be stored. There is no need to select your favorite colors over and over again. The color selection mode cycles through your selected colors. A color marker will flash twice before your selected color is displayed. The markers cycles in a set order that follows red, yellow, green, aqua, blue, and magenta then repeats. To choose a custom color, hold down the button after the marker flashes. The rev chip will strobe through 25 unique color options followed by black so that you can insert custom gaps into your sequences, release the button to save your choice. Once the choice has been saved the color marker will begin to flash again and you may choose your next selection. Notice how all choices made in the color selection mode are performed by simply holding down the button. For quick and easy setup at any time if you are done making your selection you may perform a single click to jump to the custom color modes. Here is example of how to do a 6 custom color setup: For this demo example to show you how to setup the Drops Rev we will choose colors red, green, blue, aqua, yellow, and magenta for our six custom colors. We start by holding the button down after the red marker flashes until the light strobes red. After the yellow marker we hold down the button until the light strobes green. Continue choosing your colors for the rest of the markers, ending with choosing magenta for the magenta marker. After you have chosen your custom colors you can let the markers cycle to confirm your selections. When you are ready to use your selected colors, click the button once to go to the custom color modes. There are 5 custom color modes, each with 6 different options. The modes go from 6c to 4c to 3c to 2c to single color. You can move between modes by clicking the button. After the single color mode the light will turn off. Click again to turn the Rev Chip back on in 6 color mode. In each mode you can hold the button to cycle between the six mode options.

While in six color mode, hold the button to cycle between Strobe, MicroDot, Tribbon, Hyper Strobe, Ribbon and fast ribbon.
While in four color mode, hold the button to cycle between strobe, MicroDot, Stribbon, Strobed Tracer, Tracer, and Fast Ribbon.
While in three color mode, hold the button to cycle between Strobe, MicroDot, Tribbon, Hyper Strobe, Ribbon and fast ribbon.
While in two color mode, hold the button to cycle between strobe, MicroDot, Stribbon, Strobed Tracer, Tracer, and Fast Ribbon.
In single color mode, hold the button to cycle between each of your 6 custom colors.

After choosing your own options for each of the 5 custom color modes, the rev chip will store your choice. You can now cycle between the custom color modes without having to choose your options over again. Your option choices will be stored until you remove the batteries. You can access additional areas of the rev chip from the off position. While the light is off, hold the button. The light will flash a marker color to indicate each area of the light. When you reach the area you want to access, release the button. The rev chip will boot into this area of the light. Each area has different modes, options, and presets. Be sure to explore!

Red: Custom Color Choice Area
Yellow: Custom Color Area
Green: Rave and Morph Area
Aqua: Candy 3 and 2 color modes
Blue: Rainbow modes
Magenta: Tropical modes

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  3 of 3 people found the following review helpful:
Rev = REVOLUTION January 30, 2012
Reviewer: dR0iD sL4nG3r from Chicago Underground Rave Scene  
Coming from a previous Micromax & Bit 2 user, these are legitimately the cream of the crop as they say! The modes & possibilities are endless!!!! I have absolutely fallen in love with these microlights! Personally, i see no need for any other chipset. This is THE CHIP! The dropz cases aren't as big as i thought they were, they are very easy to get articulate with. Oh, and your viewers will fall in love with your hands!!! The compliments i got with these were nonstop all night @ Rave Loko :) Def my best investment and am proud to support LE

Was this review helpful to you?

Browse for more products in the same category as this item:

Microlights > Dropz Rev